MSDS & Technical Data Sheets

All PROTEC Automotive MSDS and Technical Data Sheets can be found on the PROTEC WEBSITE www.protec.com.au

To search for an Automotive MSDS please Click Here and for a Technical Data Sheet please Click Here.

All Light Industrial Coatings (LIC) MSDS and Techical Data Sheets can be found on the PPG LIC WEBSITEClick Here to search for an LIC MSDS or Click Here if you require an LIC Data Sheet

All SEPTONE MSDS and Technical Data Sheets can be found on the SEPTONE website.  Click Here to search for a MSDS or Data Sheet for a Septone product.

Following is a fantastic summary on the use of all Protec product lines.  Click here for a PDF version of the following information or please email us:

 

Product Information

CC24 Amercoat – Mix 4 parts CC24 pack "A" to 1 part 24000-BHARD pack "B" thin with Thinner 304

182 Amercoat ZPK – Mix 4 parts 182 pack "A" to 1 part 24000-BHARD pack "B" thin to 20% with Thinner 304.

215 Rustfighter – thin up to 20% with Thinner 445

220 Styralux enamel – thin to 25% with Thinner 445

300 Quick Dry Enamel – thin 25-30% with R303 - for hot days use R203 mineral Turps.

302 MultiEtch – Mix 1 part 302 pack "A" to 1 part 302 pack "B" thin up to 30% with Thinner 265

304 Equipment Enamel - thin 25-30% with R303 - for hot days use R203 mineral Turps.

311 Hammertone - this must NOT be thinned – use direct from can, Thinning will destroy Hammer pattern.

328 Temtec – thin to 25% with Thinner 737 or Amercoat 65.

330 Acrylic lacquers - thin 1 part 330 colour to 1½ parts R102 or R212 Reducer.

363 Auto enamel - thin 10-20% with R303 – for hot days use R203 mineral Turps.

342 Spraying Enamel - thin 10-20% with R303 – for hot days use R203 mineral Turps.

342 Camouflage Enamel – thin up to 15% with R203 Mineral Turps.

367 Acrynamel – thin up to 25% with R303 - for hot days use R203 mineral Turps. DO NOT use R103.

369-9201 Urethane Additive – 363 / 342 colours – 500mls per 4 litre 304 – 250mls per 4 litre

NOTE: DO NOT use in 300 QD Enamel

370 Epotec Enamel – mix 1 part 370 pack "A" 1 part 370-9005 pack "B" cleanup – R202 work on 12 m²/mix litre.

375 EMH-Barmastic – Mix 3 parts 375 pack "A" 1 part 375-9057 pack "B" cleanup – R202.

390 EMH-Barmastic – Mix 1 part 390 pack "A" + 1 part 390-9183 pack "B" cleanup – R202.

400 Zincoat 10 - thin up to 15% with R303 - for hot days use R203 mineral Turps.

402 Zinc Phosphate Primer – thin up to 25% with R303 - for hot days use R203 mineral Turps.

404NS – thin up to 20% with R203 mineral Turps – DO NOT use R303.

404 Auto Enamel Undercoat – thin up to 20% with R303- for hot days use R203 mineral Turps.

408 Epotec Primer – Mix 4 parts 408 pack "A" to 1 part 414-9105 pack "B" thin to 20% with R202 for hot days use R270 Epoxy Slow reducer.

408-5208 ARMY – Mix 4 parts 408 pack "A" to 1 part 414-9153 pack "B" thin 40% with R270 for hot conditions use R298 Epoxy Extra Slow Reducer.

408-6098 ARMY – Mix 4 parts 408 pack "A" to 1 part 414-9153 pack "B" thin 40% with R270 for hot conditions use R298 Epoxy Extra Slow Reducer.

408-6916 ARMY – Mix 4 parts 408 pack "A" to 1 part 414-9153 pack "B" thin 40% with R270 for hot conditions use R298 Epoxy Extra Slow Reducer.

EX-408 Epoxy Primer – Mix 4 parts EX-408 pack "A" to 1 part 414-9153 pack "B" thin to 20% with R202 for hot days use R270 Epoxy Slow reducer .

EX-428 Barrierprime - Mix 4 parts EX-428 pack "A" to 1 part 414-9090 pack "B" thin to 15% with R202 for hot days use R270 Epoxy Slow reducer .

411 Structural Primer – thin up to 25% with R303 - for hot days use R203 Mineral Turps.

422 Galvaplas – thin up to 15% with R303 - for hot days use R203 mineral Turps.

425 Zinc Phosphate Primer – thin up to 25% R303 - for hot days use R203 mineral Turps.

426 Vinyl Etch Primer – Mix 2 parts by volume 426 to 1 part by volume R214 Vinyl Etch Reducer.

426 Etch Pro – thin up to 10% with R103 all purpose reducer.

434 SPF60 Acrylic Primer Surfacer – Use direct from can for filling, may be thinned with R100 or R103.

436 Customwood Primer – thin up to 50% with R100.

439 Pink Spray putty – use direct from can – DO NOT thin.

440-9255 Polyethylene Plastic Primer DO NOT thin – Use direct from can.

450N Amercoat – Mix 3 parts 450N pack "A" to 1 part 1450N-BHARD pack "B" thin to 20% with Thinner 300.

456 Zinc Phosphate Metal Primer – thin up to 20% with R203 Mineral Turps.

460 Proseal – thin up to 15% with R211 - for hot days use R203 Mineral Turps.

469 Barrierprime – Mix 9 parts 469 pack "A" to 1 part 469-9464 pack "B" thin 5% with R270 for hot conditions use R298 Epoxy Extra Slow Reducer.

472 Rapid Epoxy Primer – mix 1 part 472 pack "A" to 1 part 472-9077 pack "B" no thinning required clean up with R202.

480 Chlorinated rubber – thin up to 20% R122.

484 Epoxy Primer Undercoat - Mix 4 parts 484 pack "A" to 1 part 414-9929 pack "B" thin to 10% with R202 for hot conditions use R270 Epoxy Slow Reducer.

499 Variable Mix Primer – thin up to 25% with R303 - thin up to 20% with R203 Mineral Turps.

512 Acrylic/Carmaster super clear – thin 1 part clear to 1½ parts R102 or R212.

528 Sealers – can be thinned up to 25% with R100 reducer.

531 MultiEtch – thin up to 10% with Thinner 265.

600 Duratec – Mix 2 parts 600 pack "A" to 1 part 600-9115 pack "B" thin to 30% with R121 for brushing use R133 Brushing reducer.

601 Barthane ARMY – Mix 3 parts 601 pack "A" to 1 part 601-9074 pack "B" thin 20% with R145 for hot conditions use Barthane R178 Extra Slow reducer.

604 Acrylic Urethane Enamel – Mix 4 parts 604 pack "A" to 1 part

604-9016 Medium Hardener

604-9033 Slow Hardener

604-9062 Fast Hardener

604-9101 Standard hardener

604-9080 Satin Hardener

Thin with R125 604 Reducer for hot days use R250 Polythane reducer.

606 Paraglaze – Mix 2 parts 606 pack "A" to 1 part

PH-4200 Standard Hardener

PH-4300 High Temp Hardener

Thin to 15% with PS-6200 Standard Reducer

PS-6100 Low Temp Reducer

PS-6300 High Temp Reducer

606 Glass Additive – Mix 2 parts 606 pack "A" to 1 part 606-9345 pack "B"

Thin to 15% with PS-6200 Standard Reducer

PS-6100 Low Temp Reducer

PS-6300 High Temp Reducer

609 Colourcoat – Mix 4 parts 609 pack "A" to 1 part

609-9083 Standard hardener

609-9262 Rapid Hardener

Thin to 40% with PS-6200 Standard Reducer

PS-6100 Low Temp Reducer

PS-6300 High Temp Reducer

620 Barrcryl ICF – Mix 4 parts 620 pack "A" to 1 part 620-9058 pack "B" thin to 50% with R141 for hot conditions use R282 Barrcryl Slow reducer.

620 Glass Additive - Mix 4 parts 620 pack "A" to 1 part 620-9805 pack "B" thin to 50% with R141 for hot conditions use R282 Barrcryl Slow reducer. .

625 Polythane – Mix 2 parts 625 pack "A" to 1 part 625-9225 pack "B" thin to 15% with R250 for hot conditions use R251Polythane Slow Reducer.

625 Polythane 4+1 - Mix 4 parts 625 pack "A" to 1 part 625-9807 pack "B" thin to 30% with R250 for hot conditions use R251Polythane Slow Reducer.

630 Polywood Gloss – Mix 1 part 630 pack "A" to 1 part 630-9276 pack "B" thin to 25% with R155.

630 Polywood Satin – Mix 2 parts 630 pack "A" to 1 part 630-9351 pack "B" thin to 25% with R155.

706 Paraglaze Basecoat – Mix 1 part 706 pack "A" to 1 part thinner

PS-6200 Standard Reducer

PS-6100 Low Temp Reducer

PS-6300 High Temp Reducer

712 Hammerfin - this must NOT be thinned – use direct from can.

783 Ameretch – thin up to 50% with Thinner 265.

940 fast cure primer – Mix 1 part 940 pack "A" to 1 part 94000-BHARD pack "B" thin up to 20% Thinner 304.

977 Iso-Free – Mix 3 parts pack "A" to 1 part pack "B" 97700-BHARD thin to 25% with Thinner 300.

 

NEW CARMASTER PRODUCTS:

CP-8550 GP 2 Pack Primer Filler – Mix 4 parts CP-8550 pack "A" to 1 part

CH-5100 Fast Hardener

CH-5200 Normal Hardener

Thin 10-30% with CS-3800 GP 2 Pack Reducer.

CP-6120 2-Pack Hi Build Primer Filler – Mix 4 parts CP-6120 pack "A" to 1 part

CH-5100 Fast Hardener

CH-5200 Normal Hardener

Thin 10-30% with CS-3800 GP 2 Pack Reducer.

CC-9550 GP 2-Pack Clearcoat – Mix 2 parts CC-9550 pack "A" to 1 part

CH-5200 Normal Hardener

CH-5300 Slow Hardener

Thin 10% with CS-3800 GP 2 Pack Reducer.

CC-9240 HS 2-Pack Clearcoat – Mix 2 parts CC-9550 pack "A" to 1 part

CH-5200 Normal Hardener

CH-5300 Slow Hardener

Thin 10% with CS-3800 GP 2 Pack Reducer.

CC-7120 2-Pack Speed Clearcoat – Mix 4 parts CC-7120 pack "A" to 1 part

CH-5200 Normal Hardener

CH-5300 Slow Hardener

Thin 10% with CS-3800 GP 2 Pack Reducer.

 

NEW PARAGLAZE PRODUCTS:

PP-1550 Multiprime – Mix 4 parts PP-1550 pack "A" to 1 part

PH-4100 Low Temp Hardener

PH-4200 Standard Hardener

Thin 10-30% with –

PS-6100 Low Temp Reducer

PS-6200 Standard Reducer

PS-6300 High Temp Reducer

PP-2500 Tint & Prime – Mix 4 parts PP-2500 pack "A" to 1 part

PH-4100 Low Temp Hardener

PH-4200 Standard Hardener

Thin 20-40% with –

PS-6100 Low Temp Reducer

PS-6200 Standard Reducer

PS-6300 High Temp Reducer

PP-3860 Prime & Fill – Mix 4 parts PP-3860 pack "A" to 1 part

PH-4100 Low Temp Hardener

PH-4200 Standard Hardener

Thin 10-30% with –

PS-6100 Low Temp Reducer

PS-6200 Standard Reducer

PS-6300 High Temp Reducer

PP-6000 Ultraseal – Mix 3 parts PP-6000 pack "A" to 1 part

PH-4200 Standard Hardener

PH-4300 High Temp Hardener

Thin 50% with –

PS-6100 Low Temp Reducer

PS-6200 Standard Reducer

PS-6300 High Temp Reducer

PC-3900 Extra Flow Clearcoat – Mix 2 parts PC-3900 pack "A" to 1 part

PH-4200 Standard Hardener

PH-4300 High Temp Hardener

Thin 10% with –

PS-6100 Low Temp Reducer

PS-6200 Standard Reducer

PS-6300 High Temp Reducer

PC-5950 Ultra Finish Clear – Mix 2 parts PC-5950 pack "A" to 1 part

PH-4200 Standard Hardener

PH-4300 High Temp Hardener

Thin 10% with –

PS-6100 Low Temp Reducer

PS-6200 Standard Reducer

PS-6300 High Temp Reducer

PC-5870 Panel Clearcoat - Mix 4 parts PC-5870 pack "A" to 1 part

PH-4200 Standard Hardener

PH-4300 High Temp Hardener

Thin 50% with –

PS-6100 Low Temp Reducer

PS-6200 Standard Reducer

PS-6300 High Temp Reducer

AP-4440 Etch Primer – Mix 1 part AP-4440 pack "A" to 1 part AH-4450 pack "B" NO THINNING REQ

AP-4110 Epoxy Primer – Mix 5 parts AP-4110 pack "A" to 1 part AH-4120 pack "B" Thin 0-15% with

PS-6100 Low Temp Reducer

PS-6200 Standard Reducer

PS-6300 High Temp Reducer

AP-4990 Plas Stik Primer - DO NOT thin – Use direct from can.

AA-Plastics Cleaner - DO NOT thin – Use direct from can.