425 Zinc Phosphate Primer - Single Pack

425 Zinc Phosphate Primer - Single Pack
Brand: Protec
Product Code: 425
Availability: In Stock

Available Options

* Size:

* Colour:

   - OR -   

Please refer to the Technical Data Sheet: http://www.ppglic.com.au/uploads/tds/425%20Zinc%20Phosphate%20Primer.pdf

425 Zinc Phosphate Primer is an economical priced general purpose primer, it is an alkyd resin based general purpose industrial primer. It contains zinc phosphate for corrosion inhibition. It is relatively fast drying with excellent adhesion to suitably prepared substrates and exhibits very good gloss hold-out when over-coated with enamel finishes. 425 dries to a satin finish.

425 is ideally suited as an anti-corrosive primer for general structural steel, roofs, machinery and other equipment on good, clean and scale free surfaces.

425 Zinc Phosphate Primer should be thinned up to 25% by volume with R303 Enamel Reducer for conventional spray application.

Dust free –      10-15 minutes

Touch dry –   30 minutes

Dry to handle – 3-4 hours

Hard dry –      overnight

425 can be re-coated with most industrial enamels after 4 hours drying at normal ambient conditions, but for best results a 16 hour drying period is recommended.

425 may be recoated after 4-16 hours dry with such products as, 304 Industrial Enamel, 363 or 342 Automotive grade enamels.

Available colours:        Yellow

                                    Red Oxide



Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: