426 Vinyl Etch Epoxy Primer- Single Pack

426 Vinyl Etch Epoxy Primer- Single Pack
Brand: Protec
Product Code: 426
Availability: In Stock

Available Options


* Size:

* Colour:

   - OR -   

Please refer to the Technical Data Sheet: http://www.ppglic.com.au/uploads/tds/426%20Vinyl%20Etch%20Primer.pdf

426 Vinyl Etch Primer is an epoxy modified, unique single pack fast drying primer which has outstanding adhesion to all metal surfaces including non-ferrous metals and chrome plated steel. Unlike conventional etch primers which can only be applied in extremely thin coats, 426 can be applied in heavy coats like a normal primer and exhibits good build and hold-out. Due to its satin finish, sanding is not normally necessary, but 426 can be lightly scuffed if desired.

Thin 2 parts 426 vinyl etch primer to 1 part by volume of R214 vinyl etch reducer.

 

Touch dry – 10 minutes

Dry to handle – 30 minutes

 

Allow between 1 to 4 hours drying before re-coating. In cooler conditions and depending on the film build a longer re-coating period may be necessary.

 

426 vinyl etch primer can be re-coated with a variety of top-coats, including air dry enamels and stoving enamels

Available colours:           Yellow Green

                                        Red Oxide

                                        Grey

                                        Black

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: